AUGER DRIVE 30000 TO 40000 Nm

The Earth Drill 30000 & 40000 is an advanced planetary drive unit designed for machines capable of running up to 204lpm & comes standard fitted with a pressure relief valve set at 240bar. This units is designed for machines 17 to 30 tonne. The Earth Drill 30000 & 40000  is built to handle greater flow and pressure than that of the Earth Drill 20000, so when you need a drive unit to give you that extra aggression in extremely hard conditions, this is the unit for you. This drive unit is capable of drilling 1200mm diameter holes in almost every type of ground condition.

Drive unit Earth Drill 30000

Output Shaft 110mm Square Torque 26896 Nm Pressure 240 Bar Oil Flow Range 100 to 170 l/m H To Suit Excavators 17T to 22T range.
Drilling Diameter  150mm to 1.2 mtr

Drive unit Earth Drill 30000 BA

Output Shaft 110mm Square Torque 301721Nm Pressure 240 Bar Oil Flow Range 100 to 170 l/m
To Suit Excavators 20T to 30T range.
Drilling Diameter 150mm to 1.2 mtr

Drive unit Earth Drill 40000

Output Shaft 110mm Square Torque 15179 Nm Pressure 240 Bar Oil Flow Range 100 to 170 l/m
To Suit Excavators and Backhoes 17T to 30T range.
Drilling Diameter ( Auger Range S6) 150mm to 1.2 Metres