HD Grader
ES GA 2100 (2100mm blade ) or GA 2400 (2400mm
blade ) Grader Attachment fits readily to your loaders quick coupler and
utilises the loa
der's standard hydraulic flow system.
The compact size of the unit is excellent for driveways, building sites and road maintenance.
The Grader is fitted with electric over hydraulic controls on all the frequently used functions ( blade raise/lower, left/right side of blade are independent and angling) Finger tip (electrical controls are used are used on the control levers for lowering/raising the blade whilst the loader is moving. The Grader attachments fitted with flow control for precise hydraulic movement. A standard seven pin trailer plug is used for ease of connection to the loader. The wiring harness is fitted at our factory or on selected models can be supplied separately.
The bolt on grader blade cutting edge is reversible and the entire grader blade manually or optional hydraulically) side shifts 300mm left or right. The Grader blade has three positions for blade curl. The grader blade can angle a maximum 45deg left or right and has a maximum cutting depth of 250mm.
Can be fitted with Laser Level system for fine control
The front axels are free floating to follow the ground contours and the two pneumatic tyres are able to swivel a full 360deg.
The gooseneck is heavily re-enforced for added durability and the draw bar pivots on a two section coupling which is revisable for longer life.
Hydraulic flow required: 30-70 l/pm Maximum pressure: 190 bar Mass
weight 800kg
recommends that your skid steer loader be fitted with a factory supplied wiring harness to control
the grader’s functions. If this cannot be obtained then we can
offer our wiring harness as an alternative. Fitted with reversible bolt-on cutting edge Front axle is free floating to follow the
contours of the ground Electric over hydraulic controls + flow
controller fitted Adjustable blade curl for grading or dozing 800 kg (approximate mass)