MINI TRENCHER

500, 600 or 900mm digging depths (boom at a 50° angle) available.

Trenching widths range from between 100mm up to 300mm wide (50mm increments).

All trenchers are supplied with a depth adjusting crumber and a single 350mm clearing auger.

A robust hydraulic motor directly drives the drive shaft. This type of set-up reduces wear parts (eg. gearboxes), requires  no on-going servicing, and achieves high startup torque.

A nose "wheel" guides the chain when trenching. This limits roller wear on the digging chain.

Chain is tensioned with an internal bolt. Boom is spring loaded to protect against impacts.