BU0 Borer

BU1 Borer

• Auger f100-350mm (4-24").
• Digs 1.5m (5') deep without extension up to f250mm(12") & 2.0m(6'7") deep > f250mm (10")
• f65mm(2½") round output shaft.
• Max. torque 1350Nm(996ft/lbs)
• Output speed 52-95 rpm
• Hydraulic flow 20-45 lpm(5-12gpm).
• Max. Pressure 241 bar (3500 psi)

• Augers f100mm-350mm(4"-14")
• Digs 1.5m (5') deep without extension up to f250mm(12") & 2.0m(6'7") deep > f250mm (10")
• 65mm (2½") diameter round or 50.8mm(2") AF hex output shaft
• Max. torque 1600Nm(1180 ft/lbs)
• Max output speed 74rpm
• Max. "pull out" 6 tonne(13230lb)
• Hyd. flow 20-40lpm(5-11gpm)
• Max. pressure 207 bar (3000psi)

• Augers f100mm-600mm (4"-24")
• Auger cutting head 12mm (½") thick, auger flights 6mm (¼") thick
• Digs 1.5m (5') deep without extension up to f300mm(12") & 2.0m(6'7") deep > f300mm (12")
• 50.8mm(2") AF hex output shaft
• Max. torque 2500Nm(1843ft/lbs)
• Max. output speed 74rpm
• Max. "pull out" 6 tonne (13230lb)
• Hyd. flow 40-76lpm (10-20gpm)
• Max. pressure 207 bar (3000psi)

 Up To 5 Ton Excavator or Skid Steer

• Augers f100mm-750mm (4"-30")
• Auger cutting head 12mm (½") thick, auger flights 6mm (¼") thick
• Digs 1.5m (5') deep without extension up to f300mm(12") & 2.0m(6'7") deep greater than f300mm(12").
• 50.8mm(2") AF hex output shaft
• Max output torque 3500Nm(2580ft/lbs)
• Max output speed 74rpm
• Max pull out force 6 tonne (13230lb)
• Hydraulic flow 40-95lpm (10-25gpm)
• Max pressure 241 bar (3500psi)

• Augers f100mm-900mm (4"-36")
• Auger cutting head 12mm (½") thick, auger flights 8 & 12mm (5/16", ½") thick
• Digs 1.5m (5') deep without extension up to f300mm(12") & 2.1m(7') deep > f300mm (12").
• 50.8mm(2") AF hex output shaft
• Max torque 7400Nm(5388ft/lbs)
• Max output speed 74rpm
• Max "pull out" 8.5 tonne(13230lb)
• Hyd. flow 75-150lpm (20-40gpm)
• Max pressure 260 bar (3770psi)

Requiring up to 7,000 Nm installation torque.