Angle Sweepers PTO Drive Tow Behind
7311-01 1800mm – 70", 7311-02 2000mm – 79" and 7311-03 2200mm – 87" PTO drive tow behind Angle Sweepers fit directly on your tractor's three-point linkage.
The special PTO shaft with clutch (supplied) can tolerate the wide angles that occur when the sweeper is both low to the ground and set off at an angle.
The sweeper can be set up to 30° left or right of centre, to form debris into a windrow. A heavy-duty ball-race turntable supports the main brush housing. The brush assembly comprises of large 600mm (24") outside diameter brush segments of poly and wire, the standard ratio being 1:1, although other ratios can be supplied on request (eg. full poly brush for feed lots, full wire brush for cleaning roads).
The final reduction from the PTO to the broom drive sprocket is 3.8:1, giving a brush speed of approximately 142 RPM (at 540 RPM from the PTO). The sweeper is supplied with storage legs for parking the sweeper. The jockey wheel adjusts
the brush height and can be hinged back for loading on or off a trailer etc. the broom cover has a rubber skirt on the tractor side to protect the operator from debris when in use.
Optional fittings include dual jockey wheels and hydraulic angling.
MAXIMUM PTO SPEED: 540 RPM
MAXIMUM PTO OUTPUT: 12 Kw (16hp)
MASS: 320 kg