Slashers & Mowers
"HS" Single Head Slasher "DH" Double Head Slasher "FL" Flail Mower WM1500 Mulcher
Single Head Slasher                            Slasher – “SHD” Heavy Duty Disk Slasher
 
  • 1500mm (5') wide standard
  • 80-155mm (3"-6") cutting height, adjustable side skids
  • Single adjustable jockey wheel & pivoting Quick Hitch frame allows slasher to float over uneven ground
  • Chain "skirts" contain flying debris
  • Ideal for light slashing tasks
  • Hyd. flow 60-90lpm (16-24gpm)
  • Max Press. 207bar (3000psi)
"DH" Double Head Slasher
 
  • 1800mm (6') wide standard
  • Dual adjustable jockey wheel & pivoting Quick Hitch frame allows slasher to float over uneven ground
  • Chain "skirts" front & back contain flying debris
  • Twin counter rotating cutting bars efficiently and effectively handle difficult slashing tasks.
  • Available in standard and high flow configurations
  • Std flow 60-80 lpm (16 - 21gpm)
  • High flow 80 - 130 lpm (21 - 34 gpm)
  • Max Press. 207bar (3000psi)
"FL" Flail Mower
  • Suit a 5-8 tonne mini excavator
  • 1000mm(39") wide standard cut, 1800mm(71")wide model available for larger excavators
  • Ideal for cleaning up scrub and lantana on banks etc.
  • Shaft speed approx. 2000rpm
  • Standard flails available from most agricultural suppliers
  • Hyd. flow 80-125lpm (21-33gpm)
  • Max Press. 241bar (3500psi)

 
WM1500 Mulcher
 
  • Suitable for most high-flow skid steer and track loaders (track loaders recommended.)
  • 1500mm (60") working width.
  • Comes standard with heavy duty push guard, hydraulic hoses and couplings, adjustable bisalloy side skids and much more...
  • Reduce fuel loads in high risk areas.
  • Undergrowth maintenance in forestry/plantations.

 

 WM1500

APPLICATIONS:

  • Clear regrowth and sapling; Reduce fuel loads in high risk areas;

  • Undergrowth maintenance in forestry/plantations; Pre season Fire Trail

  • Maintenance and Construction; Private and contract land maintenance.

INCLUSIONS:

  • In-line high-pressure oil filter

  • Heavy wall push guard

  • Hydraulic hoses and couplings

  • Bisalloy wear plate on adjustable side skids

  • Hydraulic check valve, anti-cavitation valve on Voac drive motor

  • Lock valve on hydraulic door cylinder

  • Labyrinth seal incorporated in bearing housings to protect the heavy duty bearings on the main shaft.

SPECIFICATIONS:

  • Working width – 1500 mm

  • Hydraulic flow – 100 to 170 lpm

  • Overall width – 1810 mm

  • Hydraulic pressure – 200 to 420 bar

  • Mass – 1200 kg

  • No. of mulching tools - 30

  • Extremely robust & heavy construction makes it as tough as the work it does.