Tilt Buckets

To suit 3 to 40 tonne excavators

Do a better job faster, and more economically. Allowing one in one batters or 90 degree V drains to be formed simply by adjusting the angle of the bucket.

(Photo 5 tonne mini excavator)

Hydraulic rams are operate at a angle  so they can not fowl up on any material that can stick at the top of the bucket

Easy precise tilt control, using either hand or foot controls, the operator is able to constantly adjust the angle of the cutting edge to obtain the desired finished angle.

 

At full tilt, the heel of the bucket is directly under the centre line of the stick.

 

This pulling force in the same vertical direction means there a virtually no twisting forces to the excavator structure, Two-cylinder operation

Home