Auger Drive Unit Suit 2 to 5 Ton

Showing all 6 results

  • How To Order a PD Auger Drive Unit

    To work out the size of your drive unit, the PD number (PD4 )  is generally matched to the machine size PD4 = 4 ton excavator Pick your Digga PD auger drive unit from the range of sizes, then once you have picked the size check your machines “Recommended Flow Rate” then match that to the auger drive unit for example PD3  Rec flow rate of 45 -75 LPM Please note: If you are not sure you can send us a email in the contact form or give us a call on 08 83842660. We are happy to go through the specs to make sure you receive the correct drive unit The next step is to chose 3 things when ordering your drive unit by clicking on the buttons     No. 1 Choice of drive hub, the page defaults to a round hub but you have other choices of hubs to suit augers you may already own (Included in the price) No.2 Choice of – 1/2″ FLUSH FACE (SET OF 2) hydraulic  coupler or Open face – 1/2″ ISO STANDARD POPPET (SET OF 2)  (Included in the price) No.3 Choice of head bracket, double pin standard Cradle (fitted standard with lose pins) or the swing control head bracket     No.4 The price will change when you select the head bracket options Once you have gone through the above steps then all you need to to do is fill out the bucket pick up details and order your drive unit to work out the measurements on your excavator attachments you can print out our Bucket Pick Up Form  Then copy the measurements to the order form Try and see how you go, if you not sure contact us and we will guide you through it Regards The Team from Earthmoving Systems    
    Read more Add to wishlist
  • Selecting The Correct Auger Drive Unit

    AUGER DRIVES SELECTION When selecting your auger drive, it is important to understand: 1. What flow & pressure the machine has. 2. What size augers are intended to be used. 3. What ground conditions will be drilled in. SELECTING THE CORRECT DRIVE FOR THE APPLICATION IS ESSENTIAL. Machine Flow – Determines the speed at which the auger will turn. By selecting your flow range & working across the chart you can see which drive is going to be the most suitable for the application you are performing. GENERAL PURPOSE EARTH DRILLING AND SMALLER AUGERS 55 - 65 RPM Smaller augers in general earth conditions need more speed. HEAVY EARTH, CLAY, SOFT CHALKY ROCKS 45 - 55 RPM Mid sizes augers / harder soils & compact clays ROCK AUGERS 20 - 45 RPM Large augers and fracturable rock. Drilling in rock is about power not speed. Too much speed creates too much heat & therefore will wear the teeth out faster. Too much speed will also not allow the teeth to rip into the rock to break it out. N.B. Effective drilling in rock requires down pressure & torque. Not all rock is drillable and having the right machine for the application is essential. Machine Pressure – Determines the amount of torque a machine will deliver The importance of torque with drilling augers – The larger the auger diameter the more torque (pressure) that will be needed. [table id=12 /] N.B. All technical specifications are THEORETICAL only & intended to be used as a guide.
    Read more Add to wishlist
  • PDX-2 Auger Drive Unit

    Sale! $2,178.00$2,854.17
    Digga's PDX-2 earth drills are ideally suited for mini excavators 750kg tonnes to 2 tonnes with a flow between 30 to 50 lpm. Including  head bracket, 2 x 2.2mtr hydraulic hoses and choice of full face or open face hydraulic quick couplers. Ready to go to work on site
    Select options Add to wishlist
  • PD3-Auger Drive Unit

    Sale! $2,304.72$2,921.49
    Digga's PD3 earth drills are ideally suited for mini excavators 2 ton to 4tons with a flow between 45 to 75 lpm. Including  head bracket, 2 x 2.2mtr hydraulic hoses and choice of full face or open face hydraulic quick couplers. Ready to go to work on site  
    Select options Add to wishlist
  • PD4-Auger Drive Unit

    Sale! $2,621.52$3,308.58
    Digga's PD4 earth drills are ideally suited for mini excavators with a flow between 55 to 85 lpm. Including  head bracket, 2 x 2.2mtr hydraulic hoses and choice of full face or open face hydraulic quick couplers. Ready to go to work on site  
    Select options Add to wishlist
  • PD5-Auger Drive Unit (Copy)

    Sale! $3,045.24$3,625.38
    Digga's PD5 earth drills are ideally suited for mini excavators  with a flow between 60 to 95 lpm. Including  head bracket, 2 x 2.2mtr hydraulic hoses and choice of full face or open face hydraulic quick couplers. Ready to go to work on site  
    Select options Add to wishlist

Showing all 6 results

Digga drives come packed with really practical features like top mounted hose ports, cutting edge design, and a 2 piece shaft just to name a few.